Sensoray 811 Manual de usuario descargar pdf (Pagina 12)

SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 Description

OFF X X X X X Disconnect all digital I/O to TB1~TB4

X X OFF X X X Disconnect all digital inputs from J9

X X X X OFF X Disconnect all digital outputs to J9

X X ON OFF X X Enable connectivity from J9’s digital input

pins to the board (for all 4 channels)

X X X X ON OFF Enable connectivity from the board to J9’s

digital output pins (for all 4 channels)

X X ON OFF ON OFF Enable connectivity for both digital inputs

& outputs from/to J9 connector

ON ON ON OFF ON OFF Enable connectivity for both digital inputs

& outputs from/to J9 connector;

And, route the digital inputs connected to

the TB1 ~ TB4

ON OFF ON OFF ON OFF Enable connectivity for both digital inputs

& outputs from/to J9 connector;

And, route the digital outputs connected to

the TB1 ~ TB4

Others

Reserved

LED

Channel Status Indicators: D1 ~ D4

The LED D1, D2, D3, and D4 can be used for indicating the channel status, respectively.

LED Signal

D1 Status for Channel-1, the driving signal is connected to

the Channel-1 capturing chipset SAA713xHL’s GPIO15.

A logic low turns the LED on, and a high turns it off

D2 Status for Channel-2, the driving signal is connected to

the Channel-2 capturing chipset SAA713xHL’s GPIO15.

A logic low turns the LED on, and a high turns it off

D3 Status for Channel-3, the driving signal is connected to

the Channel-3 capturing chipset SAA713xHL’s GPIO15.

A logic low turns the LED on, and a high turns it off

D4 Status for Channel-4, the driving signal is connected to

the Channel-4 capturing chipset SAA713xHL’s GPIO15.

A logic low turns the LED on, and a high turns it off

GPIO Status Indicators: D5 ~ D8:

The LED D5, D6, D7, & D8 are used for indicating the status of the digital input/output

signals (pins), labeled as GPIO1 ~ GPIO4 on the board, and directly connected to the

TB1 ~ TB4. A logic 0 (low) turns the LED on and a logic 1 (high) turns it off.

1 2 ... 7 8 9 10 11 12 13 14 15

Sin comentarios

Sensoray 811 Manual de usuario Pagina 12